Detailed Product Description

The truck is equipment with the following systems and devices:

Circulating Pumping System
the circulating pumping system,uesd for water supply,supercharging,injection,water & slurry circulating,consists of various centrifugal pumps,low pressure piping,manual/air butterfly valves.Different equipment may need different piping layout and centrifugal pumps.

High Pressure Discharge Manifolds
The high pressure discharge manifolds,including swivel joints,plug valves,elbows,unions and pressure gauge,connect the discharge ports of fluid end of one or two pumps to wellhead cementing man ent tank.

Overpressure Protection Device

The fluid end of plunger pump is fitted with a safety valve whose preset value is maximum pressure of pump,when actual pressure exceeds the preset value,the safety valve will automatically open to release pressure.After pressure is less than the preset value,it will close.

Electric Sensor Overpressure Shutdown Device
A pressure gauge will measure the pressure in the pipeline.When the measured pressure displayed in a computer exceeds the preset value,the computer will send an instruction to make engine idle,and then pluger pump will stop.

GJC50-30(70-25) Double Engine Double Pump Cementing Truck are fitted with two 3ZB- 265 plunger pump. They are featured by high pressure high displacement, even mixing and stability.

Standard Parts:

Benz Chassis
DDC6064-TK33 engine
Engine power: 450hp(336kW)
"ALLISON" HD4700 OFS transmission
3ZB-265 horizontal triplex plunger pump
Plunger diameter: 5"(127mm)/4-1/2"(114.3mm)
Air control system
Hydraulic control system
Lubrication system
ACM-III Automatic Mixing System
Instrument control system
Suction and discharge manifolds
Overpressure protection system